Well, we should also mention that there are holistic and spiritual benefits of wearing copper. When copper is mixed with skin perspiration, the result is chelated copper pieces that absorb into the skin and turn it green. This process is actually believed to have health benefits including relief from arthritis and circulation issues.
Not so bad after all, is it? So, what other jewelry metals turn skin green? It depends on the alloy mixture, but most alloys contain nickel and copper, both of which commonly cause skin discoloration. That said, alloyed jewelry items which are rhodium plated will prevent skin discoloration.
Well, considering brass is made from a mixture of metals including copper and zinc, oxidation is common. Many people buy brass jewelry because it is inexpensive, however it commonly discolors skin and even tarnishes. Unfortunately, many elements cause brass to turn skin green including humidity, skin oils and sweat.
You bet. Which is why it might come as a surprise to have your skin discolor from wearing sterling silver jewelry. After all, sterling silver is a classic and beloved jewelry metal. During this process, jewelers use a combination of metals and often, copper is added to the mix.
Is that a bad thing? Not at all. It depends on who is wearing the jewelry. Additionally, certain skin creams and lotions can cause skin discoloration. There are several jewelry metals that cause your skin to turn green. While some of these metals are more inexpensive materials, not all cheap jewelry turns skin green, and not all fine jewelry escapes skin discoloration.
Your finger turns green from sterling silver because of a chemical reaction between the metal and your skin. Copper is usually the culprit; it reacts with the pH levels on your skin to create the green color where your skin and the metal meet. Take a look at the hand cream next to your bed, too - some of the chemicals in these creams will also cause the metal to oxidize, even if your skin isn't normally sensitive. Clear nail polish has become the duct tape of the fashion world - it's a fixer, and the same is true for sterling silver jewelry.
Use the polish on the inside of your ring to create a barrier between the silver and the skin. However, it's not a permanent fix and you'll have to reapply as needed. A simple solution is to take off your rings before you shower, wash your hands, go swimming, etc. This is much easier said-than-done, of course, but it's something to keep in mind.
This is a method that tends to be more effective than clear nail polish, and it's not too expensive , either. Just like the nail polish, you'll need to re-apply every few weeks.
This is also a safer bet than clear nail polish, as it's specifically made for jewelry and won't cause any damage to your rings. Yes, you read that right but don't run to your fridge and wolf down a whole jar of dills just yet. You're going to want to use a combination of water and ammonia, which you can purchase at the grocery store.
How do get the discoloration off my skin? First of all, it's not a permanent discoloration, so you don't need to worry about any long-term effects. In rare cases, a person can develop a copper allergy if the problem is not dealt with in a timely manner.
Ideally, your skin should go back to normal in a few hours. If it doesn't, lor you just can't stand to look at the stain anymore, you can remove it yourself. First, use warm water on a washcloth, along with a couple of drops of liquid soap.
Then, rub the cloth on your skin to remove the stain. Rinse your hands afterward. If this doesn't do the trick, rubbing alcohol is also an option. Grab a cotton ball, wet it, and then apply the rubbing alcohol to it.
This should remove the excess staining from your fingers. Of course, another problem could be that there is some of that green gunk stuck to the inside of your ring.
It's called verdigris pronounced 'verda-greez' and it can eat away at your jewelry over time if you don't remove it. A toothbrush is the safest way to do it, as the soft bristles won't damage or scratch your jewelry. This formula results in the highest quality silver jewellery, and is used by high-end brands as well as more affordable fashion jewellery brands, and therefore it must never be assumed that a trace of copper equals poor quality.
Quite the contrary, it makes your jewellery stronger. If you are one of the few people who experience staining when you wear jewellery, there are some steps you can take to prevent such occurrences and better enjoy your accessories.
Take off your rings before you wash your hands, shower, or go swimming. Damp skin can often expedite the process of oxidation and cause a more noticeable green stain on your skin. Chemicals found in lotions can also react to the materials in your jewellery, therefore causing a darker stain on your skin. Make sure the lotion has absorbed into your skin completely before putting on your rings.
Whilst green staining can happen from many different types of jewellery—both high and low quality, it is true that lower quality jewellery is more likely to cause a stain. Always be aware of what materials are present in your rings, in order to avoid the Green Finger. Stainless steel, sterling silver, platinum, rhodium-plated and gold-plated materials are all made from safe materials that are good for sensitive skin, and yet can still cause some staining.
Try to avoid nickel, as it is the cheapest and lowest quality material that can be found in jewellery, and is known to cause irritation and infection. Objekts jewellery do not contain nickel. If you are unsure, please contact us at hello objektsstore.
One of the best and most effective ways to avoid the Green Finger is to apply a polymer barrier to the inner band of your rings. This effectively creates a barrier between the jewellery and your skin, which prevents oxidisation and staining. A Jewellery Shield product is cheap to buy, and you will need to reapply every few weeks once it has worn away.
This is by far the cheapest and most efficient way of reducing Green Finger, without splashing out on expensive solid-gold or solid-platinum accessories! If in dire immediate need, another alternative to a polymer barrier is clear nail polish. Just as with a polymer barrier, you can apply a layer of nail varnish to the inside of your rings in order to form some protection between the metals and your skin. This method is less effective, however, and can also change the appearance of your jewellery.
What can you do to remove the staining? The first and most obvious step is to remove the stain by scrubbing your skin with soap and warm water. Use a nailbrush to provide a little more friction. Wipe over the affected area with some cotton, and then rinse of with warm water and soap. For particularly dark and troublesome stains, you may also use a non-acetone nail varnish remover. Again, use a cotton pad to apply gently over the stain, and rinse with soap and warm water.
This method should be your last option however, and should not be used on a regular basis, as it is harsher on the skin and can cause dryness. Here at Objekts, we only use high quality sterling silver, platinum-plated, rhodium-plated and 18k gold-plated jewellery in our products.
0コメント