A sharper turning radius makes for a safer ride, and it opens up new ways of using your board. Lift for higher ollies. For the skateboarders out there, adding risers will noticeably lift your deck higher off the ground, which instantly makes it easier to snap off high ollies.
The effect is essentially the same as having a steeper tail, which generations of skaters have attested to producing higher ollies. Shock Pads Rubber. Rubber shock pads achieve the same purpose as riser pads do, but they add the extra benefits of a cushioned ride. Shock pads are always on the small side because of the softness of rubber compared to harder plastic.
Were they too thick, the cushioning would become mushiness. There are a couple benefits to softening your ride. Cushioning for rough pavement. Rolling over rough concrete is never a pleasant experience, especially with rock-hard skateboard wheels. Even the softer longboard wheels transmit some of the vibrations from rougher pavement.
Shock pads absorb much of those vibrations before they can reach the board and get transferred to your feet. There is simply a lack of the annoying and uncomfortable shocks from the wheels hitting things. Prevent stress cracks. Those cracks result from the aging wood in the deck shrinking while under stress from skating and from the tightness of the truck bolts.
Stress cracks are one reason why old decks can feel spongy, but they can also ruin even relatively new boards. One way to prevent them is by using shock pads, because they absorb the energy from the common stresses in skating. The equipment you use should add to your experience and should enable you to do what you want when you skate. Riser pads, or risers, are hard plastic pads that can be inserted between the skateboard trucks and deck to raise the overall height of the skateboard.
They are used to avoid wheel bite, which occurs when the wheel rubs the skateboard deck during a turn or just after a trick. Wheel bite suddenly stops the wheel's motion, which can mean a nasty wipeout for you and damage for your skateboard wheels.
Depending on your skateboarding style, riser pads can preserve your skateboard deck by reducing the risk for stress cracks where the deck and the trucks meet. Riser pads come in a variety of color, designs, and thickness levels. Browse Warehouse Skateboards' vast selection of skateboard riser pads to trick out your skateboard.
The larger your wheels are, the greater chance there is for wheel bite. If your skateboard has large wheels, such as on a longboard or cruiser, you may want to consider risers. In general, the longer the board and the larger the wheel, the more height is needed in a riser pad.
Shortboarders may also use them to prevent wheel bite after landing a skate trick, thus prolonging the life of their board. They also have the added bonus of giving your board extra pop, since they add more distance between the tail and the ground.
Another reason for skateboard riser pads is that they absorb some of the shock of impact, which can help keep your hardware from vibrating loose.
If you decide to put risers on your skateboard, you'll need to adjust your hardware size to accommodate the extra height. Consult the chart below to figure out what hardware length matches your risers. You might hear "riser pads" and "shock pads" used interchangeably, and while they look very similar and both go in the same place on your skateboard, there are subtle but important differences between the two. First, they have slightly different purposes. Riser pads are designed to increase the height of your board in order to avoid wheel bite, and shock pads are designed to absorb shock to make for a smoother ride.
That brings us to the second difference: they are made from different materials. Shock pads are made from rubber or dense foam, and riser pads are made from hard plastic. You can also keep balance while doing stunts on your skateboard. To clarify, taking a sharp turn during wheel bites can be dangerous. You might be injured seriously. However, riser pads increase the height and prevent wheel bites.
So, you can safely take a sharp turn on your skateboard. Wheel rubs the deck during wheel bite. As a result, the deck gets damaged quickly. As the riser pad prevents wheels bite, it also increases the durability of the skateboard deck.
Each truck is directly attached to the board through four heavy screws. The hard metal of the truck is connected to the soft material of the board. As a result, it causes stress and damages the board with the use. The riser is placed between the truck and the board. So, it reduces the stress. The riser pads increase the height of the skateboard. Therefore, few skateboard tricks are going to be difficult to do for skaters.
As you know, the riser pads increase the height of the skateboard. Moreover, there are many alternatives to skateboard riser pads. If you are not comfortable with the riser pads, you should go with the other options. Needless to say, it is a crucial question for every skater.
Most experienced skaters use riser pads to prevent wheel bites. There are various kinds and colors of riser pads available in the market. However, you have to choose risers pads depending on your skateboard style to get the best result. Besides, you have to use the accurate size of hardware accommodating the extra height. So, it would be great if you used the hardware accordingly.
0コメント